Dunno why, but i love to collect the new picture of helmets.
Seems interested to see it sometimes... :P
Motorcycle helmets greatly reduce injuries and fatalities in motorcycle accidents, thus many countries have laws requiring acceptable helmets to be worn by motorcycle riders. These laws vary considerably, often exempting mopeds and other small-displacement bikes. In some countries, most notably the USA, there is some opposition to compulsory helmet use (see Helmet law defense league);
not all USA states have a compulsory helmet law.
Worldwide, many countries have defined their own sets of standards that are used to judge the effectiveness of a motorcycle helmet in an accident, and define the minimal acceptable standard thereof. Among them are:
- AS 1698 (Australia)
- CSA CAN3-D230-M85 (Canada)
- JIS T8133 (Japan)
- NZ 5430 (New Zealand)
- ECE 22.05 (Europe)[3]
- DOT FMVSS 218 (USA)[4]
- Snell M 2005 "2005 Helmet Standard For Use in Motorcycling"
The Snell Memorial Foundation has developed stricter requirements and testing procedures for motorcycle helmets with racing in mind, as well as helmets for other activities (e.g. drag racing, bicycling, horseback riding), and many riders in North America consider Snell certification a benefit when considering buying a helmet while others note that its standards allow for more force (g's) to be transferred to a rider's head than the U.S. Department of Transportation (DOT) standard.[5] However, the DOT standard does not test the chin bar of helmets with them,[6] while the Snell (and ECE) standards do. A motorcycle helmet with either standard will nonetheless provide vastly more protection than one with neither.
In the United Kingdom, the Auto-Cycle Union (ACU) defines a stricter standard for racing than the legal minimum ECE 22.05 specification. Only helmets with an ACU Gold sticker are allowed to be worn in competition, or at track days. Many riders in the UK choose helmets with an ACU Gold sticker for their regular on-road use.
[edit] Basic types
This full face helmet prevented possible injury to its wearer.
[7] 
Frontal impact force was absorbed by this helmet's chin bar.
A motocross helmet showing the elongated sun visor and chin bar
Modular (flip-up) helmet, open and closed
There are five basic types of helmets intended for motorcycling, and others not intended for motorcycling but which are used by some riders. All of these types of helmets are secured by a chin strap, and their protective benefits are greatly reduced, if not eliminated, if the chin strap is not securely fastened so as to maintain a snug fit.
From most to least protective, as generally accepted by riders and manufacturers, the helmet types are:
[edit] Full face
A full face helmet covers the entire head, with a rear that covers the base of the skull, and a protective section over the front of the chin. Such helmets have an open cutout in a band across the eyes and nose, with a plastic face shield (which may be clear or tinted) that generally swivels up and down to allow access to the face. Many full face helmets include vents to increase the airflow to the rider.
The significant attraction of these helmets is their protectiveness. Some critics dislike the increased heat, sense of isolation, lack of wind, and alleged reduced hearing of such helmets. Full face helmets intended for off-road use sometimes omit the face shield but extend the visor and chin portions.
Studies have shown that full face helmets offer the most protection to motorcycle riders because 35% of all crashes showed major impact on the chin-bar area [7]. Wearing a helmet with less coverage eliminates that protection — the less coverage the helmet offers, the less protection for the rider.
[edit] Off-Road/Motocross
The motocross and off-road helmet has clearly elongated chin and visor portions, a chin bar, and partially open face to give the rider extra protection while wearing goggles. The visor is to keep the sun out of the eyes of the rider when he or she goes off jumps.
Originally, off-road helmets did not include a chin bar, with riders using helmets very similar to modern open face street helmets, and using a face mask to fend off dirt and debris from the nose and mouth. Modern off-road helmets include a (typically angular, rather than round) chin bar to provide some facial impact protection in addition to protection from flying dirt and debris. When properly combined with goggles, the result provides most of the same protective features of full face street helmets.
[edit] Modular or "Flip-up"
A hybrid between full face and open face helmets for street use is the modular or "flip-up" helmet, also sometimes termed "convertible" or "flip-face". When fully assembled and closed, they resemble full face helmets by bearing a chin bar for absorbing face impacts. Its chin bar may be pivoted upwards (or, in some cases, may be removed) by a special lever to allow access to most of the face, as in an open face helmet. The rider may thus eat or drink without unfastening the chinstrap and removing the helmet.
Modular helmets are designed to be worn in the closed position for riding, as the movable chin bar is designed as a convenience feature, useful while not actively riding. The curved shape of an open chin bar and face shield section can cause increased wind drag during riding, as air will not flow around an open modular helmet in the same way as a three-quarters helmet. Since the chin bar section also protrudes further from the forehead than a three-quarters visor, riding with the helmet in the open position may pose increased risk of neck injury in a crash.
As of 2008, there have not been wide scientific studies of modular helmets to assess how protective the pivoting or removable chin bars are. Observation and unofficial testing suggest that significantly greater protection exists beyond that for an open face helmet, and may be enough to pass full-face helmet standardized tests,[8] but the extent of protection is not fully established by all standards bodies.
The DOT standard does not require chin bar testing. The Snell Memorial Foundation has not yet certified any manufactured modular helmet using full-face standards.[9] ECE 22.05 allows certification of modular helmets with or without chin bar tests, distinguished by -P (protective lower face cover) and -NP (non-protective) suffixes to the certification number,[10] and additional warning text for non-certified chin bars.[11]
[edit] Open face or 3/4
The open face, or "three-quarters", helmet has a rear which also covers the back of the skull, but lacks the lower chin bar of the full face helmet, and does not necessarily include a face shield. Many offer visors of selectable length which may be used by the rider to reduce sunlight glare. An open face helmet provides the same rear protection as a full face helmet, but little protection to the face, even from non-crash events.
Bugs, dust or even wind to the face and eyes can cause rider discomfort or injury. As a result, it is not uncommon (and in some states, is required by law) for riders to wear wrap-around sunglasses or goggles to supplement eye protection with these helmets. Alternatively, many open face helmets include, or can be fitted with, a face shield extending over the upper portion of the face to protect the eyes.
[edit] Half helmet
The half helmet, also referred to as a "shorty", has essentially the same front design as an open face helmet but with a raised rear. The half helmet provides the minimum coverage generally allowed by law in the U.S. As with the open face, it is not uncommon to augment this helmet's eye protection through other means. Unlike open face and full face helmets, half helmets are also prone to shifting and sometimes coming off of the rider's head during an accident. Because of their inferiority compared to other helmet styles, some Motorcycle Safety Foundation courses prohibit the use of half helmets during riding exercises.
[edit] Headwear not intended for motorcycling
There are other types of headwear - often called "beanies," "brain buckets" or "novelty helmets" (a term which arose since they can not legally be called "motorcycle helmets") - which are not certified and generally only used to provide the illusion of compliance with mandatory helmet laws. Such items are often smaller and lighter than helmets made to DOT standards, and are unsuitable for crash protection because they lack the energy-absorbing foam that protects the brain by allowing it to come to a gradual stop during an impact. A "novelty helmet" can protect the scalp against sunburn while riding and - if it stays on during a crash - might protect the scalp against abrasion, but it has no capability to protect the skull or brain from an impact.
Modular helmet in white (light colors increase visibility)
[edit] Visibility
Although black helmets are popular among motorcyclists, they offer the least visibility to motorists. A rider wearing a plain white helmet rather than a black one reduces his or her chance of collision by 24% [12][13] because it is so much more visible — day or night. Nevertheless, black helmets outsell white ones (photo, above) by 20:1.[citation needed] Helmets of other colors vary in the visibility they provide to motorists by where they fall on a scale from black to white.
[edit] Construction
Modern helmets are constructed from plastics. Premium price helmets are sometimes reinforced with kevlar or carbon fiber. They generally have fabric and foam interiors for both comfort and protection. Motorcycle helmets are generally designed to break in a crash (thus expending the energy otherwise destined for the wearer's skull), so they provide little or no protection after their first impact. Note that impacts may, of course, come from things other than crashing, such a dropping a helmet, and may not cause any externally visible damage. For the best protection, helmets should be replaced after any impact, and every three or so years even if no impact is known to have occurred.
[edit] Function
The conventional motorcycle helmet has two principal protective components: a thin, hard, outer shell typically made from polycarbonate plastic, fiberglass, or Kevlar and a soft, thick, inner liner usually made of expanded polystyrene or polypropylene foam. The purpose of the hard outer shell is:
- to prevent penetration of the helmet by a pointed object that might otherwise puncture the skull, and
- to provide structure to the inner liner so it does not disintegrate upon abrasive contact with pavement. This is important because the foams used have very little resistance to penetration and abrasion.
The purpose of the foam liner is to crush during an impact, thereby increasing the distance and period of time over which the head stops and reducing its deceleration.
To understand the action of a helmet, it is first necessary to understand the mechanism of head injury. The common perception that a helmet's purpose is to save the rider's head from splitting open is misleading. Skull fractures are usually not life threatening unless the fracture is depressed and impinges on the brain beneath and bone fractures usually heal over a relatively short period. Brain injuries are much more serious. They frequently result in death, permanent disability or personality change and, unlike bone, neurological tissue has very limited ability to recover after an injury. Therefore, the primary purpose of a helmet is to prevent traumatic brain injury while skull and face injuries are a significant secondary concern.
The most common type of head injury in motorcycle accidents is closed head injury, meaning injury in which the skull is not broken as distinct from an open head injury like a bullet wound. Closed head injury results from violent acceleration of the head which causes the brain to move around inside the skull. During an impact to the front of the head, the brain lurches forwards inside the skull, squeezing the tissue near the impact site and stretching the tissue on the opposite side of the head. Then the brain rebounds in the opposite direction, stretching the tissue near the impact site and squeezing the tissue on the other side of the head. Blood vessels linking the brain to the inside of the skull may also break during this process, causing dangerous bleeding.
Another hazard, susceptibility of the brain to shearing forces, plays a role primarily in injuries which involve rapid and forceful movements of the head, such as in motor vehicle accidents. In these situations rotational forces such as might occur in whiplash-type injuries are particularly important. These forces, associated with the rapid acceleration and deceleration of the head, are smallest at the point of rotation of the brain near the lower end of the brain stem and successively increase at increasing distances from this point. The resulting shearing forces cause different levels in the brain to move relative to one another. This movement produces stretching and tearing of axons (diffuse axonal injury) and the insulating myelin sheath, injuries which are the major cause of loss of consciousness in a head trauma. Small blood vessels are also damaged causing bleeding (petechial hemorrhages) deep within the brain.
It is important that the liner in a motorcycle helmet is soft and thick so the head decelerates at a gentle rate as it sinks into it. Unfortunately, there is a limit to how thick the helmet can be for the simple reason that the helmet quickly becomes impractical if the liner is more than 1–2 inches (2.5–5 cm) thick. This implies a limit to how soft the liner can be. If the liner is too soft, the head will crush it completely upon impact without coming to a stop. Outside the liner is a hard plastic shell and beyond that is whatever the helmet is hitting, which is usually an unyielding surface, like concrete pavement. Consequently, the head cannot move any further, so after crushing the liner it comes suddenly to an abrupt stop, causing high accelerations that injure the brain.
Therefore, an ideal helmet liner is stiff enough to decelerate the impacting head to an abrupt stop in a smooth uniform manner just before it completely crushes the liner and no stiffer. The required stiffness depends on the impact speed of the head, which is unknown at the time of manufacture of the helmet. The result is that the manufacturer must choose a likely speed of impact and optimize the helmet for that impact speed. If the helmet is in a real impact that is slower than the one for which it was designed, it will still help but the head will be decelerated a little more violently than was actually necessary given the available space between the inside and outside of the helmet, although that deceleration will still be much less than what is would have been in the absence of the helmet. If the impact is faster than the one the helmet was designed for, the head will completely crush the liner and slow down but not stop in the process. When the crush space of the liner runs out, the head will stop suddenly which is not ideal. However, in the absence of the helmet, the head would have been brought to a sudden stop from a higher speed causing more injury. Still, a helmet with a stiffer foam that stopped the head before the liner crush space ran out would have done a better job. So helmets help most in impacts at the speeds they were designed for, and continue to help but not as much in impacts that are at different speeds. In practice, motorcycle helmet manufacturers choose the impact speed they will design for based on the speed used in standard helmet tests. Most standard helmet tests use speeds between 4 and 7 m/s (9 and 16 mph, or 14 and 25 km/h).
[edit] Standards testing
Most motorcycle helmet standards use impacts at speeds between 4–7 m/s (9–16 mph). At first glance, this is confusing given that motorcyclists frequently ride at speeds higher than 20 m/s (45 mph). This confusion is relieved by understanding that the perpendicular impact speed of the helmet is usually not the same as the road speed of the motor cycle and that the severity of the impact is determined not only by the speed of the head but also by the nature of the surface it hits. For example, the surface of the road is almost parallel to the direction the motorcyclist moves in so only a small component of his velocity is directed perpendicular to the road while he is riding. Of course, other surfaces are perpendicular to the motorcyclist's velocity, such as trees, walls and the sides of other vehicles. The other vital factor in determining the severity of an impact is the nature of the surface struck. The sheet metal wall of a car door may bend inwards to a depth of 7.5–10 cm (3–4 inch) during a helmeted head impact, meaning that it generates more stopping distance for the rider's head than the helmet itself. So a perpendicular impact against a flat steel anvil at 5 m/s (11 mph) might be about as severe as a 30 m/s (67 mph) oblique impact against a concrete surface or a 30 m/s perpendicular impact against a sheet metal car door or windscreen. Overall, there is a very wide range of severity in the impacts that could conceivably happen in a motorcycle impact. Some of these are more severe than the impacts used in the standard tests and some are less so.
The speeds are chosen based on modern knowledge of the human tolerance for head impact, which is by no means complete. It is possible to deduce how well the 'perfect' helmet outlined in the Function section of this page would perform in an impact of a given severity. If currently available data suggest that the rider is unlikely to survive in such an impact, regardless of how well his helmet performs, then there is little point in demanding that helmets be optimized for this impact. On the other hand, if an impact is so mild that the rider is unlikely to be injured at all so long as he is wearing a helmet than that impact is not a demanding test. Modern standards setters choose the severity of the standard test impact to be somewhere between these two extremes, so that manufacturers are doing their best to protect the riders who can be helped by their helmet during a head impact.
[edit] See also
[edit] References
- ^ Paul Harvey, The Rest of the Story, KGO 810AM, August/September 2006.
- ^ Lawrence of Arabia, Sir Hugh Cairns, and the Origin of Motorcycle Helmets (accessed 2008-05-09)
- ^ "ECE 22.05 Motorcycle Helmet Standard, revision 2
". Economic Commission for Europe (1995-10-16). Retrieved on 2008-09-19. - ^ "Standard No. 218; Motorcycle helmets
". Code of Federal Regulations, Title 49, section 571.218. National Highway Traffic Safety Administration (2007-10-01). Retrieved on 2008-09-19. - ^ Dexter Ford (June 2005). "Motorcycle Helmet Performance: Blowing the Lid Off
". Motorcyclist. Retrieved on 2007-09-19. - ^ "Standard No. 218; Motorcycle helmets
". Code of Federal Regulations, Title 49, section 571.218 subsection S6.2.3. National Highway Traffic Safety Administration (2007-10-01). Retrieved on 2008-09-19. - ^ a b Why Wear A Full-Face Helmet?
- ^ "Seven Flip-Face Motorcycle Helmets Compared
". Motorcycle Cruiser. Retrieved on 2008-09-19. - ^ "Why won't Snell certify some types of helmets like flip up front designs?
". FAQs about Snell and Helmets. Snell Memorial Foundation. Retrieved on 2008-09-19. - ^ "ECE 22.05 Motorcycle Helmet Standard, revision 2
" subsection 5.1.4.1.2.1. Economic Commission for Europe (1995-10-16). Retrieved on 2008-09-19. - ^ "ECE 22.05 Motorcycle Helmet Standard, revision 2
" subsection 14.1. Economic Commission for Europe (1995-10-16). Retrieved on 2008-09-19. - ^ Susan Wells et al. (2004-04-10). "Motorcycle rider conspicuity and crash related injury: case-control study
". BMJ. Retrieved on 2007-09-02. Abstract
, Quick summary
- ^ Reduce Risk 24%!
source: http://en.wikipedia.org/wiki/Motorcycle_helmet
************
VaRieTY of HeLmeTs
A. Helmets Collection of Nexx Chrome
Wow.. helmet from denim.. Fashionable, hmm?
The Nexx Chrome bears an uncanny resemblance to a toaster, no?
The Nexx Vision Army Helmet should appeal to rugged, militaristic types
Add a "racing decal" to a Pop, and you get a Pop 01
Interested to see more?
Come directly to their`s site at http://motorcycles.about.com/
B. Another cool helm
C. HELMET GUIDE So you've bought that bike you were dreaming of for ages. So what is the first thing that you do? Get yourself a helmet, that's what. A helmet is your first line of defence in case of a bang-up, something that could make a difference between life and death. Sirish Chandran brings you the lowdown on helmets, how and what helmet you should buy, helmets you should avoid besides evaluating eight of the best helmets available in the country. |
As usual, I tried hard to come up with something funny to start off this feature. But fret and fuss as much I could, there was nothing funny to conjure up when the subject veers around to helmets. My dear friend and colleague Freddy Gilles was killed in May purely due to negligence. Negligence on the part of the road development authorities for littering the road with debris but more importantly negligence on Freddy's part for not protecting his head with a helmet. Had Freddy been wearing a helmet as he used to daily, he would have been with us today.
Helmets save lives. Period. Anybody who tells you otherwise is insane or has his eye on your share of the inheritance.
In all developed countries and most developing nations helmets are compulsory for bikers. Back in the seventies when helmets were made compulsory in Britain, anti-helmet activists went to great lengths to protest against what they felt was an infringement on their rights, some even converting to Sikhism to avoid wearing a helmet. But now a helmet is a part and parcel of the biking culture and nobody questions the wisdom behind its use. Even in countries like Bhutan and Nepal, helmets are compulsory. It is only in India that political compulsions have come in the way of enacting and enforcing legislation making helmets compulsory. Sad but true, our government is more concerned with protecting its vote bank than protecting lives of citizens.
History:
The basis for any protective device is two-fold: there must be the perception of risk and also the perception that the said device somehow attenuates that risk. From antiquity to the present, protective headgear has prevailed whenever both these perceptions exist, and has disappeared whenever either perception is questioned.
The use of protective headgear may be as old as warfare itself. There are numerous accounts of how Alexander the Great had been saved many times by his fluted helmet and even the 'Iliad' contains references to head injuries prevented by helmets.
The protective capabilities of all headgear are continually being balanced by their wearers against other features such as visual impact, comfort and ease of use. The importance of visual impact, what sociologists might describe as the headgear's ceremonial and decorative function, is particularly strong in our species. This visual impact of headgear will always weigh heavily in subjective evaluations of a helmet's worth.
What does a helmet do?:
For starters, a helmet keeps your head warm and dry while also protecting you from the elements. The second and most important function a helmet serves is to protect your 'nut should you get knocked off. A helmet can't protect your head against all-foreseeable high speed and low speed impacts, as there are a number of accidents that can take place. The use of a well-fitting, securely fastened helmet can minimise the risk of death or permanent impairment due to head injury.
There are broadly two types of helmets: full-face (where a chin bar and flush-fitting visor cover the face and chin), and open-face (sometimes referred to as Jet-type helmets) where the face and chin are exposed. The type you choose depends largely on what type of riding you plan to do and what level of protection and comfort you desire.
Author: Sirish Chandran Source
September 2001
source: http://www.indiabike.com/infobank/helmetguide.htm
D. Head Liv and Cloe Snowboarding Helmets
This year,
Head have added a little bit of the pretty to their technology-led women's helmet collection. The Liv features super-soft furry lining and a beanie fitted inside the hat to make it warm and comfortable, and clever thermal ventilation that keeps you warm but never lets you get hot. It also comes with vent plugs to stop the cold/snow/rain getting in when the weather gets a little stormy, and is all round good looking to boot. I'm impressed.
source: http://www.nollie.tv/2007/08/head-liv-and-cl.html
Step1
Step4
Nizoral Anti – Dandruff Shampoo ($11.50) - a prescription shampoo for dandruff causing conditions like seborrhea, as well as for the treatment of psoriasis for several years now. Controls the flaking, scaling, and itching associated with dandruff. Nizoral shampoo is available in an OTC 1% strength, ideal for allowing individuals to take control of their treatment, potentially circumventing the need for some prescription items. Use twice a week to control a leading cause of dandruff and be dandruff-free.
Rene Furterer Anti-Dandruff Shampoo ($24) - Melaleuca Anti-Dandruff Shampoo for greasy dandruff eliminates dandruff and reduces itchiness. Curbicia extract regulates sebum secretions. Helps the effects of the treatment gel to last longer
Rene Furterer Melaleuca Anti Dandruff Gel ($24.50) - cleanses the scalp and perfectly removes oily dandruff, thanks to the essential oil of Melaleuca and Pyrithione Zinc. It helps regulate oil production and calm itching.
Neutrogena T/Gel Dandruff Shampoo ($18) – this anti-dandruff shampoo provides everyday dandruff control. Clinically proven dandruff protection while gentle on hair. This fresh-scented shampoo is enriched with Vitamin E. Contains 1% pyrithione zinc to relieve itching and flaking, Vitamin E to moisturize hair and scalp, and wheat proteins to protect hair. Effectively fights dandruff and is gentle enough for daily use
Head & Shoulders Intensive Solutions Seborrheic Dermatitis & Dandruff Shampoo for Dry/Damaged Hair ($15) – this anti-dandruff shampoo helps prevent recurrence of flaking and itching associated with dandruff and seborrheic dermatitis. Treats and helps prevent seborrheic dermatitis, dandruff and scalp-related problems: itching; flaking; dryness; irritation; redness. With conditioning technology protects hair against damage.
Ionil-T Therapeutic 1% Coal Tar Shampoo ($22.50) - Helps eliminate dandruff problems due to seborrhea and psoriasis. Tar helps reduce the production of skin cells, giving you a healthier looking scalp. Reduces itching and flaking. Contains the equivalent of 1% Coal Tar. For best results use at least twice a week or as directed by a physician.
Kenra Dandruff Shampoo ($12) - medicated anti-dandruff shampoo that relieves itching and flaking of the scalp associated with seborrheic dermatitis and dandruff. This ultra-gentle formula leaves hair silky and manageable, while helping to prevent further dandruff development. The shampoo treats seborrhea and other skin and scalp conditions and soothes dry, itchy and irritated scalp.
